skip to main |
skip to sidebar
- Never burn candles unattended. Keep out of reach of children and pets, especially when lit. Do not burn near a draft. Disturbances in the flame can cause sooting.
- Keep the wick trimmed to 1/4 inch. Wicks that are too long the candle will create excess soot and turn the jar black. If you burn for extended hours (more than 4 to 6 hours,) or if the flame become too high, begins to smoke, or flickers repeatedly, extinguish the candle. After it has cooled a bit, trim the wick, and re-light. If problem persists, discontinue use.
- Discontinue burning when 1/2 inch wax remains on the bottom of the jar; excessive heat on glass may cause the jar to shatter.
- Be sure wicks are LEAD FREE. Lead wicks are prohibited in candles made in the United States. If you do not know where your candle was poured, check for the lead free note on the bottom label.
- Using a wick dipper to extinguish the flame. Dip the wick into the molted wax to extinguish and straighten the wick upright. This will reduce smoke and will make the wick easier to re-light for the next use.
- Always light both wicks on the two wick candles. Lighting both wicks and letting the candle burn long enough to liquefy the entire top surface will ensure even burning throughout the jar.
- Use a candle holder, jar snugger, or trivet to protect the surfaces in your home. The glass becomes hot during burning. Place on a heat resistant surface. Do not place directly on a glass table.
